Vaccination Card Holder Tutorial
1 piece of material for the front part, 1 piece of clear vinyl for pocket and 1 piece of material for the lining. Tear away stabilizer or cut away stabilizer for dense designs.
Scissors, threads, everything else you might need.
|Hoop some stabilizer and stitch out the placement stitch.|
|Place your material over the placement stitches and run next the step. Stitch out the entire design.|
|Flip the hoop and expand the guide lines. Place the lining fabric so that it covers all the stitches and secure it in place.|
|Run the next step and tack down the lining.|
|I didn't have clear vinyl on hand, so I used almost clear vinyl. Place the pocket on the back of the hoop using the guidelines and secure in place.|
|Vinyl like this can usually get stuck on the machine so I use WSS to keep it smooth.|
|Run the final step and tack down the pocket.|
|Cut the project by shape, add some hardware and you're done!|
|Back side view :)|