ITH Moon Cat Plushie Instruction

Supplies needed: 2 piece of super soft fabrics of your choice. I used velboa faux fur fabric, but you can use what works best for you. Tear away stabilizer. WSS (water soluble stabilizer) on top. For the smallest plushie sizes, it is better to have a tool like tweezers in the arsenal, I used a large tweezers for stuffing. Scissors, threads, everything else as usual.
Hoop stabilizer and stitch out placement stitch.
Place your material over placement stitches and secure it in place. Then tack down the fabric and the upper stabilizer with the next step.
Then stitch all the pretty details of our project.
Lay the material piece for the back face down over the whole design and make sure it covers all placement stitch too.
Run the final outline step.
Remove hoop from machine. Now you can remove project from hoop. Gently tear away stabilizer (or cut if using cut away) being careful not to damage stitches. Cut the design not too close to stitches. And it's better to leave some material near the hole. Carefully turn your plushie right side out.
Stuff it with any material you like and then sew the hole. Fasten all the details in any order and form that you think looks good.
Well done you made it!